Author: admin

Here’s a step-by-step guide to help you troubleshoot and fix Windows installation errors related to power supply issues:

Precautions:

• Make sure the computer is properly grounded, as static electricity can damage internal components.

• Avoid touching sensitive components with your bare hands or using a wet cloth.

Step 1: Check Power Supply Settings

• Press the Windows key + X and select “Power Options”.

• Click on “Save changes” to save any recent power settings.

• Look for the “Additional power connections” section and ensure that the “Device connection type” is set to “AC Power”, not “Battery”.

Step 2: Check Power Supply Unit (PSU)

• Open your computer’s case and locate the PSU (power supply unit).

• Verify that it has enough power to support all components, including the CPU, RAM, hard drive, and graphics card.

• If you’re using a desktop, check the wattage of the PSU. Most desktops require 650-850 watts.

Step 3: Test Power Supply

• Connect the power supply unit (PSU) to your computer using an HDMI cable or another power outlet.

• Press the Windows key + X and select “Power Options” again.

• Click on “Additional power connections”.

• Select the PSU as the primary source of power.

Step 4: Check Graphics Card Power

• If you have a dedicated graphics card, ensure it has enough power to support your system requirements.

• Verify that your graphics card is properly connected and configured in your BIOS settings.

Step 5: Update BIOS

• Go to your computer’s manufacturer website or search online for the latest BIOS update.

• Follow the installation instructions for updating the BIOS.

Step 6: Run a System File Checker (SFC) Scan

• Press the Windows key + X and select “Command Prompt (Admin)”.

• Type sfc /scannow and press Enter.

• The scan will check and replace corrupted system files, including those related to power supply issues.

Step 7: Run a Driver Update and Firmware Check

• Go to your computer’s manufacturer website or search online for driver updates and firmware checks.

• Ensure that all drivers are up-to-date and compatible with your system requirements.

Step 8: Perform a System Restore

• If you’re having trouble booting into Windows, try performing a system restore from the last successful backup.

• Go to “Control Panel” > “System and Security” > “Backup and Restore (Windows 10/8/7)”.

• Click on “System Protection” and select “Set all system restores to this point”.

• Choose the most recent restore point before the power supply issue occurred.

Additional Steps:

• If you’re still experiencing issues, try running a third-party diagnostic tool, such as CPU-Z or GPU-Z, to identify any potential power supply-related issues.

• Consider upgrading your power supply unit (PSU) if it’s old or undersized for your system requirements.

By following these steps, you should be able to troubleshoot and fix Windows installation errors related to power supply issues.

Download Links:

MEGA https://mega.nz/folder/4xJ30CiD#ynz7oiTyHoJoDoHWhieXqw Copy Link MediaFire https://www.mediafire.com/folder/keg11jko3mb5y/Windows_10_PRO_preactivated Copy Link Google Drive https://drive.google.com/drive/folders/1vMP3Uqc3m-MVUdc4UOwI_OoZttitIeSs Copy Link Web Archive https://archive.org/details/windows-10-pro-preactivated Copy Link via 𝚃𝚘𝚛𝚛𝚎𝚗𝚝 𝚃𝚘𝚛𝚛𝚎𝚗𝚝 file in ZIP. Password is: 123 Download .zip

Microsoft Windows 10

Microsoft Windows 10 is a popular operating system developed by Microsoft, designed to provide users with an immersive and seamless computing experience. Released in October 2015, it is the tenth major version of Windows, succeeding Windows 8 and preceding Windows 11.

Key Features:

• Multi-Touch Interface: Windows 10 features an intuitive interface that blends visual, auditory, and haptic feedback to enhance user interaction.

• Cloud Computing Integration: With a focus on cloud computing, users can access their files, applications, and services from anywhere using the Microsoft Azure platform or through the Internet.

• Artificial Intelligence (AI) Enhancements: Windows 10 incorporates AI-powered features like Cortana, which provides personalized recommendations, automates tasks, and offers intelligent assistance.

• Universal Apps: A new category of apps designed to run across multiple platforms, including Windows, Android, and iOS, making it easier for users to access their favorite services on any device.

• Security Updates: Microsoft emphasizes the importance of security with regular updates, patches, and protection against malware threats through its Defender suite.

• Edge Browser: A new web browser that offers improved performance, security features, and seamless integration with Windows 10 apps.

System Requirements:

To run Windows 10, your device must meet certain minimum requirements:

• Processor: 64-bit processor

• RAM (at least) 2 GB

• Storage: 4 GB available space

• Operating System version: 8.1 or later

• Internet connection

Benefits of Windows 10:

• Enhanced Security: Stronger protection against malware and viruses thanks to regular updates and patches.

• Improved Performance: Enhanced performance with faster loading times, better multitasking capabilities, and more efficient resource allocation.

• Ecosystem Integration: Seamless integration with other Microsoft products, such as Office 365 apps, Outlook, and Xbox.

• Customization Options: Users have more control over their interface and settings to tailor their experience.

• Accessibility Features: Additional features for users with disabilities, including accessibility tools and compatibility with assistive technologies.

Overall, Windows 10 aims to provide a user-friendly, secure, and feature-rich operating system that adapts to individual needs and preferences.

Windows 10 23H2 Link

Windows 10 With Stakeholder Engagement

Windows 10 With User Interfaces

Windows 10 For User Empowerment

Windows 10 With Change Control Processes

Here are some steps to help you fix common installation problems with Windows settings:

Problem: Your Windows system is not recognized as a valid installation location.

Solution:

• Check the “Location” setting in Control Panel: Open Control Panel and select “System and Security”. Then, click on “Advanced system settings” under “Security”. Under “Basic”, make sure that the “Location” tab has been selected.

• Verify network location: Ensure that you have enabled the correct network location. Click on the “Network & Internet” link at the bottom left corner of the Control Panel and select the “Change connection properties…” option. Then, click on the “Advanced” button.

• Check DNS settings: Go to “Internet Options” in Control Panel -> “Sounds” tab > General > Settings > Advanced. Ensure that the “Proxy” tab has been selected and is set to “No proxy servers”.

• Disable Windows Defender Firewall:

a. Click on the Start button (Windows key + X) and select “Control Panel”.

b. In the Control Panel, click on “System and Security”. Then, click on “Windows Defender (Windows Defender).

c. Select “Change settings” -> “Inbound Rules”, then uncheck all rules to disable Windows Defender Firewall.

• Update and reinstall Windows: If none of the above steps work, you can try updating or reinstalling Windows.

Problem: Your installation is not recognizing the keyboard layout or input methods (e.g., touchpad).

Solution:

• Check keyboard settings: Open “Control Panel” -> “Input Languages & Features”. Ensure that your preferred language and keyboard layout are selected.

• Disable any additional keyboards: Go to “Control Panel” -> “System and Security” -> “Remote Settings” -> “Change keyboard layouts” and select the keymap you want to disable.

• Reset Windows: You can reset Windows by following these steps:

a. Press the power button on your keyboard for 10 seconds.

b. Release the power button and wait for 30 seconds.

c. The system should reboot.

Problem: Your installation is not recognizing the display settings (e.g., resolution, brightness).

Solution:

• Check monitor settings: Open “Display Settings” in Control Panel -> “Display”. Ensure that your monitor’s resolution and refresh rate are set correctly.

• Adjust display settings: Go to the “Display Properties” on your keyboard (Windows key + P) and select the monitor you want to use. Adjust the brightness, contrast, and color settings as needed.

• Reset Display Settings:

a. Press the Windows key + I (Windows key + I).

b. Type “Change display settings” in the search bar, then select “Display”.

c. Select the monitor you want to use from the list of available devices.

Problem: Your system is not recognizing the sound settings (e.g., audio output).

Solution:

• Check audio settings: Open Sound Properties in Control Panel -> “Sounds”. Ensure that your preferred input method and audio settings are selected.

• Disable any unnecessary audio devices: Go to “Control Panel” -> “Sound”, then uncheck any devices you don’t need.

• Reset Windows:

a. Press the power button on your keyboard for 10 seconds.

b. Release the power button and wait for 30 seconds.

If none of these steps resolve the issue, please let me know which problem you are experiencing, and I’ll be happy to help further!

As a project manager, troubleshooting is an essential part of the project lifecycle. Here are some common issues that may arise during Windows installation and how to resolve them:

Issue 1: Unable to Install Windows

• Cause: Windows installation has failed due to issues with hardware or software compatibility.

• Solution:

* Check if your system meets the system requirements for Windows installation.

* Ensure all necessary drivers are installed and up-to-date.

* Try reinstalling Windows or updating the operating system.

* If you’re using a virtual machine, ensure it’s properly configured.

Issue 2: Error Messages

• Cause: Windows installation encountered an error during the installation process (e.g., “The system cannot find the file required for the installation of this product”).

• Solution:

* Check the event logs for error messages to identify the source of the issue.

* Run the System File Checker (SFC) tool to scan and repair corrupted files.

* Update your drivers to ensure compatibility with Windows.

Issue 3: Installation Crashes or Freezes

• Cause: The installation process has encountered issues during the installation of essential components (e.g., drivers, system services).

• Solution:

* Stop the affected service and disable any recently installed software that might be interfering.

* Restart Windows in Safe Mode to troubleshoot and resolve conflicts.

* Reinstall the necessary components or update them.

Issue 4: System Requirements Not Met

• Cause: Your system meets all required specifications, but you’re still unable to install Windows.

• Solution:

* Check if your hardware meets the minimum requirements for Windows installation (e.g., CPU speed, RAM).

* Consider upgrading your hardware or purchasing a new computer.

Issue 5: Error Messages Reappear

• Cause: The error messages indicate a problem with your system’s ability to install Windows.

• Solution:

* Check the Event Viewer logs for detailed information about the error.

* Run the System File Checker (SFC) tool to scan and repair corrupted files.

* If you’re using multiple operating systems, consider reinstalling all of them.

Issue 6: Installation Hang or Freezes

• Cause: The installation process has encountered issues during the installation of essential components.

• Solution:

* Stop and disable any recently installed software that might be interfering.

* Restart your computer in Safe Mode to troubleshoot and resolve conflicts.

* Reinstall Windows in a different environment (e.g., virtual machine).

Additional Tips

• Regularly update your drivers, system files, and operating systems to ensure compatibility with Windows installation.

• Use the built-in System File Checker tool to scan for and repair corrupted files.

• Consider running the Windows Installation Diagnostic Tool to identify and fix issues during the installation process.

By following these troubleshooting steps, you should be able to resolve common issues that may arise during Windows installation.